ufm13pl UFM11PL- ufm17pl 100 35 50.0 10.0 30.0 1.0 ufm17pl ufm16pl ufm15pl ufm14pl ufm12pl UFM11PL uk um ug ud ua ub current: 1.0a u1j 50 75 1.7 1.4 1.0 plastic body over passivated junction voltage range: 50 - 1000v method 2026 : color band denotes cathode end : any :0.0007 ounce, 0.02 grams glass passivated device ideal for surface mouted applications metallurgically bonded construction high temperature soldering guaranteed: 250 c/10 seconds,0.375 ? (9.5mm) lead length, 5 lbs. (2.3kg) tension low reverse leakage case terminals polarity mounting position weight : jedec sod-123fl molded : plated axial leads, solderable per mil-std-750, features mechanical data ! ! ! ! ! ! ! ! ! ! ! ! a m c ns 700 1000 v rrm v rms v dc i (av) i fsm v f maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current at t a =65 c (note 1) peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage at 1.0a maximum dc reverse current t a =25 c at rated dc blocking voltage t a =125 c i r t l =25 c maximum reverse recovery time (note 2) operating junction and storage temperature range t j , t stg -50 to +150 trr 70 100 280 400 140 200 420 600 560 800 35 50 50 100 200 400 600 800 1000 maximum ratings and electrical characteristics t a = 25 c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. note: 180 k/w 3.measured at 1mhz and applied reverse voltage of 4.0v d.c. 1.averaged over any 20ms period. 2.measured with if=0.5a, ir=1a, irr=0.25a. 4.thermal resistance junction to ambient, 6.0 mm2 coppeer pads to each terminal. typical thermal resistance (note 4) r q ja characteristic symbol unit marking v v v v a a 3.58 3.72 0.55 0.57 0.53 0.15 0.17 0.13 e d 1.00 1.03 0.097 1.05 1.08 1.02 1 1.80 1.83 1.77 2.75 2.78 2.72 a 3.65 3 sod-123fl dim min max typ b c h l all dimensions in mm a e l b c e h d 1 of 2 www.sunmate.tw ultra fast recovery silicon rectifier diodes
ratings and characteristic curves UFM11PL thru ufm17pl 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 175 0.2 0.6 1.0 1.4 1.8 2.0 fig. 3-typical instantaneous forward characteristics fig. 2-maximum non-repetitive peak forward surge current fig. 1- forward current derating curve average forward rectified current, amperes instantaneous forward current,amperes peak forward surge current, amperes instantaneous forward voltage, volts single phase half wave 60hz resistive or inductive load 0.01 0.1 1 20 10 0 20 40 60 80 100 1,000 100 10 1 0.1 0.01 tj=100 c tj=25 c percent of peak reverse voltage,% fig. 4-typical reverse characteristics instantaneous reverse current, microamperes ambient temperature, c t j =25 c pulse width=300 m s 1%duty cycle UFM11PL-ufm13pl ufm14pl ufm15pl-ufm17pl 30 25 20 15 10 5.0 0 number of cycles at 60 hz 1 10 100 8.3ms single half sine-wave (jedec method) 2 of 2 www.sunmate.tw
|
